T238 V1.7 optical mosfet for V2 gearbox

The DTU V1.7 optical Sensor Version for V2 Tokyo Marui gearbox is a multifunctional MOSFET switch. Specifically designed for AIRSOFT, Gel Ball Blaster, other V2 gearboxes with semi-automatic and fully automatic functions. this mosfet version is already wired.

Functions:

1. Supports up to 14.8V battery.
2. Binary trigger. Put the selector in semi-auto position, pull and hold the trigger for 3 seconds will change the semi-auto function into binary trigger shooting mode.
3. Auto-loading function is designed for gel ball blaster magazines with motor inside, when changing the magazine, the magazine motor will run automatically for 0.5 second.
4. PRE-COCKING. The default position of the piston is adjustable is semi-auto model.Per-cocking function can be implemented,zero trigger delay.
5. ETU overheat protection. When the DTU is overheated, after the trigger is pulled, the motor will give a beep prompt until it is automatically restarted after cooling.
6. Low battery voltage protection ：the default setting is 7.4V battery.Change the battery when hearing'beep，beep，beep，beep'4 times low voltage warning sound.
7. Active braking. The energy that supports the active brake function comes from the inertia of motor, stop the piston without delay. The effect of active brake is significant on high torque motor.
8. Fast speed of response. This module is powered by small current，the current flow through the MOSFET directly to the motor，provide higher current to increase the rate of fire and speed of response.
9. Block-up protection. When gearboxBlock-up occurs, the system stops working and emits an elongated 'beep' sound. Please check the wave box immediately by power off.
10. Multiple shooting modes. The system includes multiple shooting modes，those modes can be selected by fire select switch.
11. Gearbox protection. The active brake prevents the over-spin of gears,this solves the issue that single shot changes to multiple shot under high voltage.meanwhile,the spring is fully released in semi-auto model and parts in the gearbox are not under strain,increase the life cycle of your gearbox.

Package Content:

• Digital trigger unit V1.7
• X1 Manual
• Badge X1
• Small bag accessories X1

Shooting Modes:

• SAFE: This model is completely the same as original safe model.The trigger is stopped by safety lever.
• SEMI :This model can be programmed to implement semi-auto, double stroke single shot, 3-round burst to 6 rounds burst, the default model is semi auto.
• AUTO :This model can be programmed to implement full-auto, 3-round burst, 6-round burst and 9-round burst, the default model is full-auto.