Using the CTW trigger as programmator, you can modify :
To change Full Auto/3 Burst Mode in your Manual ECU you have to
1. Unload magazine
2. release bolt switch
3. turn selector switch to Auto from Safe
4. press and hold trigger until a flash from LED
5. mode changed.
To change Day/Night mode of LED you have to
1. Unload magazine
2. release bolt switch
3. turn selector switch to Auto from Semi
4. press and hold trigger until a flash from LED
5. mode changed.
To change setting of Low Battery Indicator you have to
- For 11.1V Li-Po batteryOpen jump of V1 and V2
- For 9.6V NiMH batteryShort jump of V1 or V2
- For other battery or disable indicator : Short both of V1 and V2
To understand the meaning of LED
- LED keeps on Airsoft is ready to shot, be careful
- LED keep flash Battery is low, please recharge
- LED keep flash slowly : Battery is empty, power cut off and please recharge
- LED off Magazine is empty or fuse burned
THIS PRODUCT IS ALREADY MOISTURE PROOFED
Warning : In case of issue with this product assembled by yourself there is no warranty, exchange or refund. Warranty will be validated only by our workshop installation on your airsoft gun. This product is only compatible with FCC FTW & Systema PTW, any other installation on other brands may result immediate and definitive failure of the component.
